Surgical and implantology template Implant-Guide® is used during the dental implantation surgery by doctor, for the precision setting of the implant in the planned position.

Download PDF booklet “Implant-Guide variants” – 2.1 MB

If you need to make an X-ray template or it is necessary to make a preliminary measurement of mucous membrane at the position of the implant on a computed tomography scan and see the position of future teeth for optimal arrangement of implants relative to them.

Download PDF booklet “X-ray templates” – 1.0 MB

On the basis of anatomical patient data acquired during the computer tomography and the arrangement of implants modeled by the doctor in the Implant-Assistant Planner software, the surgical and implantology template is designed in the Implant-Assistant Guide software, and then creates the 3D prototype for installation and delivers it to the doctor for surgery.
Using the Implant-Guide® with drill guides and drills with stoppers excludes mistakes of place, direction, and depth of drilling. This makes it possible to avoid of need for periosteum detachment while reducing the time and impact of surgery.

Implant-Guide® Components
When there is a need for rigid stabilization of the Implant-Guide® on the jaw, then the template fixation system is used, consisting of drill guide, drill, screwdriver, special retainer screw, and detent pin.

Download PDF booklet “Implant-Guide Components” – 1.7 MB

Test Surgical Template Implant-Guide®
You can order Implant-Guide® for your patient even if you are not yet using Implant-Assistant® software in your practice.

Download PDF booklet “Test Implant-Guide” – 400 KB

Implant-Guide® manufacturing time is 3-7 business days.